AKG-D7
D7 ეს არის დინამიური ვოკალური მიკროფონი, რომელიც წარმოქმნის დახვეწილ და სუფთა ჟღერადობას. მისი მექანიკურ-პნევმატური კაფსულა აფერხებს მოძრაობისას წარმოქმნილ ხმაურს და უზრუნველყოფს მიკროფონის კავშირს ფიდბექთან. მიკროფონს გააჩნია მეტალის ფილტრი, რომელიც იცავს მტვრისაგან და უზრუნველყოფს მის გრძელვადიან გამოყენებას.
General Specifications
Audio frequency bandwidth-70 - 20000 Hz
Sensitivity-2.6 mV/Pa
Electrical impedance-600 Ohms
Recommended load impedance-2000 Ohms
Polar Pattern -Supercardioid
Audio Output
Type-Balanced XLR
Gender-Male
Contacts-3-pin
Dimensions
Length-185 mm
Diameter-51 mm
Net Weight-320 g
Design
Body-metal
Finish- dark stage blue
629
DBX 215S
ორ არხიანი 15 ზოლიანი ეკვალაიზერი სტანდარტია სტუდიური და აუდიო ინსტალაციებისათვის. 215 S გთავაზობთ განსაკუთრებულ ხმას და აკმაყოფილებს ყველა მოთხოვნას ხმის გასაძლიერებლად.
Specifications
Input Connectors
1/4" TRS, female XLR (pin 2 hot)
Input Type
Electronically balanced/unbalanced, RF filtered
Input Impedance
Balanced 40 kOhm, unbalanced 20 kOhm
Max Input
>+21dBu balanced or unbalanced
CMRR
>40dB, typically >55dB at 1kHz
Output Connectors
1/4" TRS, male XLR (pin 2 hot)
Output Type
Impedance-balanced/unbalanced, RF filtered
Output Impedance
Balanced 100 ohm, unbalanced 50 ohm
Max Output
>+21dBu balanced/unbalanced into 2 kOhm or greater; >+18dBm balanced/unbalanced (into 600 ohm)
Bandwidth
20Hz to 20kHz, +0.5/-1dB
Frequency Response
<10Hz to >50kHz, +0.5/-3dB
Dynamic Range
Typically >112dB
Signal to Noise Ratio
Typically >95dB
THD+Noise
<0.003%
Interchannel Crosstalk
<-90db, 20Hz to 20kHz
Bypass Switch
Bypasses the graphic equalizer section in the signal path
Low cut Switch
Activates the 50Hz 12dB/octave Bessel high-pass filter
Range Switch
Selects either +/- 6dB or +/- 12dB slider boost/cut range
Operating Voltage
100VAC-240VAC 50/60Hz
Power Consumption
15W
Power Connector
IEC receptacle
Unit Weight
4.8 lbs.(2.2 kg)
Shipping Weight
6.2 lbs.(2.8kg)
Dimensions
1.75" (4.4cm) H x 6"(15.24cm) D x 19" (48.26cm) W
515
New
182.464
Square aluminium truss
Black powder coating
Fast and easy to assemble
Lightweight
Coupling system P30 excluded
Made in Europe
TÜV certified
Specifications:
Product colour
Black
Alloy
EN-AW 6082 T6
Main Tubes (Chords)
50 x 2mm
Braces
16 x 2mm
Dimensions (L x W x H)
1500 x 290 x 290mm
Weight (kg)
7.9000
942.45
New
24 პორტიანი FTP CAT 6 პაჩპანელი
24 პორტიანი FTP CAT 6 პაჩპანელი
ძირითადი მახასიათებლები:
კატეგორია: Cat6
ტიპი: FTP
პორტების რაოდენიბა: 24
ნომინალური ძაბვა: 125 VAC RMS
ნომინალური დენი: 1.5 AMP
კონტაქტის წინაღობა: 100MILLIOHMS MAX
იზოლაციის წინაღობა: 1000 MEGOHMS MIN 500 VDC
დიელექტრიკული სიმძლავრე: 750 VAC RMS 60Hz 1MIN
შენახვის ტემპერატურა: -40° - 85°
მუშაობის ტემპერატურა: 0° - 70°
კორპუსი: PBT
გარსი: უჟანგავი ფოლადი T=2მმ
პანელის ჩარჩო: ნახშირბადოვანი ფოლადი, შავი, 1.5მმ
PCB მასალა: FR-4T=1.6მმ
IDC მასალა: PC, კონტაქტი: ფოსფორი/ბრინჯაო; მონიკელებული
RJ45 ჯეკის სასიცოცხლო ციკლი: 750 მინ.
IDC სასიცოცხლო ციკლი: 200 მინ.
სადენი: AWG 22-26
85.36
New
24 პორტიანი FTP CAT5E პაჩპანელი
24 პორტიანი FTP Cat5e პაჩპანელი
ძირითადი მახასიათებლები:
კატეგორია: Cat5e
ტიპი: FTP
პორტების რაოდენიბა: 24
ნომინალური ძაბვა: 125 VAC RMS
ნომინალური დენი: 1.5 AMP
კონტაქტის წინაღობა: 100MILLIOHMS MAX
იზოლაციის წინაღობა: 1000 MEGOHMS MIN 500 VDC
დიელექტრიკული სიმძლავრე: 750 VAC RMS 60Hz 1MIN
შენახვის ტემპერატურა: -40° - 85°
მუშაობის ტემპერატურა: 0° - 70°
კორპუსი: PBT
გარსი: უჟანგავი ფოლადი T=0.2მმ
პანელის ჩარჩო: ნახშირბადოვანი ფოლადი, შავი 1.5მმ
PCB მასალა: FR-4T=1.6მმ
IDC მასალა: PC, კონტაქტი: ფოსფორი/ბრინჯაო; მონიკელებული
RJ45 ჯეკის სასიცოცხლო ციკლი: 750 მინ.
IDC სასიცოცხლო ციკლი: 200 მინ.
მოოქროვება: 3U
სადენი: AWG 22-26
78.29
New
24 პორტიანი UTP CAT 6 პაჩპანელი
24 პორტიანი UTP CAT 6 პაჩპანელი
ძირითადი მახასიათებლები:
კატეგორია: Cat6
ტიპი: UTP
პორტების რაოდენიბა: 24
ნომინალური ძაბვა: 125 VAC RMS
ნომინალური დენი: 1.5 AMP
კონტაქტის წინაღობა: 100MILLIOHMS MAX
იზოლაციის წინაღობა: 1000 MEGOHMS MIN 500 VDC
დიელექტრიკული სიმძლავრე: 750 VAC RMS 60Hz 1MIN
შენახვის ტემპერატურა: -40° + 85°
მუშაობის ტემპერატურა: 0° +70°
კორპუსი: ABS
პანელის ჩარჩო: ნახშირბადოვანი ფოლადი, შავი, 1.5მმ
PCB მასალა: FR-4T=1.6მმ
IDC მასალა: PC, კონტაქტი: ფოსფორი/ბრინჯაო; მონიკელებული
RJ45 ჯეკის სასიცოცხლო ციკლი: 750 Min.
IDC სასიცოცხლო ციკლი: 200 Min.
სადენი: AWG 22-26
45.48
New
24 პორტიანი UTP CAT5E პაჩპანელი 110/KRONE
24 პორტიანი UTP Cat5e პაჩპანელი 110/Krone
ძირითადი მახასიათებლები:
კატეგორია: Cat5e
ტიპი: UTP
პორტების რაოდენიბა: 24
ნომინალური ძაბვა: 125 VAC RMS
ნომინალური დენი: 1.5 AMP
კონტაქტის წინაღობა: 100MILLIOHMS MAX
იზოლაციის წინაღობა: 1000 MEGOHMS MIN 500 VDC
დიელექტრიკული სიმძლავრე: 750 VAC RMS 60Hz 1MIN
შენახვის ტემპერატურა: -40° - 85°
მუშაობის ტემპერატურა: 0° - 70°
კორპუსი: ABS
პანელის ჩარჩო: ნახშირბადოვანი ფოლადი, შავი 1.5მმ
PCB მასალა: FR-4T=1.6მმ
IDC მასალა: PC, კონტაქტი: ფოსფორი/ბრინჯაო; მონიკელებული
RJ45 ჯეკის სასიცოცხლო ციკლი: 750 მინ.
IDC სასიცოცხლო ციკლი: 200 მინ.
სადენი: AWG 22-26
მოოქროვება: 3U
42.02
New
4-CHANNEL SWITCH PACK II beamZ
A 4-channel DMX switch pack switching light effects such as PAR lights on and off, through the built-in programmes, standalone or in DMX mode. The speed of the 16 built-in programs can be controlled. Channel-control takes place via the easy access menu.
DMX512 control, stand-alone
Relay switched, suitable for LED lighting
16 built-in sequences
Adjustable chase speed
4 SHUKO sockets
Specifications:
Product colour
Black
Max. Load
16A
DMX connection
3-pin XLR
Power supply
220-240VAC 50Hz
Dimensions (L x W x H)
260 x 210 x 90mm
Weight (kg)
2.4000
518.2
New
48 პორტიანი FTP CAT5E პაჩპანელი
48 პორტიანი FTP Cat5e პაჩპანელი
ძირითადი მახასიათებლები:
კატეგორია: Cat5e
ტიპი: FTP
პორტების რაოდენიბა: 48
ძაბვა: DC1000V AC700V RMS 60HZ, MIN
კონტაქტის წინაღობა: 20M OHMS MAX
იზოლაციის წინაღობა: 500M OHMS MIN 500V DC
შენახვის ტემპერატურა: -40° + 70°
მუშაობის ტემპერატურა: -10° +60°
თავსებადობა: ANSI/TIA/EIA 568B, 2-10
IDC მასალა: PC, UL94Y-0; თავსებადია 22-26 AWG სადენთან
ტერმინალი: ფოსფორი/ბრინჯაო, მოოქროვილი 3U”/6U”/15U”/30U”/50U”
RJ45 ჯეკის სასიცოცხლო ციკლი: 750 Min.
IDC სასიცოცხლო ციკლი: 250 Min.
128.44
New
AC-120 SOFT CASE beamZ
The AC-120 Soft Case is primarily designed to protect and extend the life of mobile lighting fixtures. Its wide opening allows for a variety of fixtures to fit inside and gear to be removed quickly and easily. It fits other products and accessories as well. Suitable for mobile DJs, Karaoke rigs and working bands.
Quality protection for mobile lighting fixtures
Secured zipped pocket for storing extra Lamps, Clamps, Cables and other Accessories
Saves valuable transport space by allowing fixtures to be stacked without having to be boxed
Secure view windows make it easy to identify specific fixtures even after they have been packed
Affordable padded soft case
Specifications:
Product colour
Black
Dimensions: Internal
19 x 10.5 x 10 inch // 482 x 266 x 254mm
Weight (kg)
0.7500
134.05
New
AC-126 SOFT CASE beamZ
The AC-126 Soft Case is primarily designed to protect and extend the life of mobile lighting fixtures. Its wide opening allows for a variety of fixtures to fit inside and gear to be removed quickly and easily. It fits other products and accessories as well. Suitable for mobile DJs, Karaoke rigs and working bands.
Quality protection for mobile lighting fixtures
For storing extra Lamps, Clamps, Cables and other Accessories
Saves valuable transport space by allowing fixtures to be stacked without having to be boxed
Secure view windows make it easy to identify specific fixtures even after they have been packed
Affordable padded soft case
Specifications:
Product colour
Black
Dimensions: Internal
14 x 8.25 x 8 inch // 355 x 205 x 200mm
Weight (kg)
0.4500
112.7
New
AC-131 SOFT CASE beamZ
The AC-131 Soft Case is primarily designed to protect and extend the life of mobile lighting fixtures. Its wide opening allows for a variety of fixtures to fit inside and gear to be removed quickly and easily. It fits other products and accessories as well. Suitable for mobile DJs, Karaoke rigs and working bands.
Quality protection for mobile lighting fixtures
For storing extra Lamps, Clamps, Cables and other Accessories
Saves valuable transport space by allowing fixtures to be stacked without having to be boxed
Secure view windows make it easy to identify specific fixtures even after they have been packed
Affordable padded soft case
Specifications:
Product colour
Black
Dimensions: Internal
21 x 8.5 x 13 inch // 530 x 215 x 330mm
Weight (kg)
0.7000
149.3
New
AC-135 SOFT CASE beamZ
The AC-135 Soft Case is primarily designed to protect and extend the life of mobile lighting fixtures. Its wide opening allows for a variety of fixtures to fit inside and gear to be removed quickly and easily. It fits other products and accessories as well. Suitable for mobile DJs, Karaoke rigs and working bands.
Quality protection for mobile lighting fixtures
For storing extra Lamps, Clamps, Cables and other Accessories
Saves valuable transport space by allowing fixtures to be stacked without having to be boxed
Secure view windows make it easy to identify specific fixtures even after they have been packed
Affordable padded soft case
Specifications:
Product colour
Black
Dimensions: Internal
18.9 x 9.8 x 7.1 inch // 480 x 250 x 180mm
Weight (kg)
0.5500
117.43
New
AC-420 SOFT CASE beamZ
The AC-420 Soft Case is newly designed to protect and extend the life of mobile lighting fixtures. Its wide opening allows for a variety of fixtures to fit inside and gear to be removed quickly and easily. It fits other products and accessories as well. Suitable for mobile DJs, Karaoke rigs and working bands.
Quality protection for mobile lighting fixtures
For storing extra Lamps, Clamps, Cables and other Accessories
2 Dividers to accomodate various products
Saves valuable transport space by allowing fixtures to be stacked without having to be boxed
Secure view windows make it easy to identify specific fixtures even after they have been packed
Affordable padded soft case
Specifications:
Product colour
Black
Dimensions: Internal
19 x 10 x 10.5 inch // 483 x 254 x 267mm
Weight (kg)
0.9500
152.35
New
AC-425 SOFT CASE beamZ
The AC-425 Soft Case is newly designed to protect and extend the life of speaker and lighting stands. Its wide opening allows for a variety of fixtures to fit inside and gear to be removed quickly and easily. It fits other products and accessories as well. Suitable for mobile DJs, Karaoke rigs and working bands.
Quality protection for speaker and lighting stands
For storing extra Lamps, Clamps, Cables and other Accessories
Saves valuable transport space by allowing fixtures to be stacked without having to be boxed
Secure view windows make it easy to identify specific fixtures even after they have been packed
Affordable padded soft case
Specifications:
Product colour
Black
Dimensions: Internal
42.5 x 6.25 x 6 inch // 1080 x 159 x 152mm
Weight (kg)
1.1500
152.35
New
AC-440 SOFT CASE 6 UPLIGHTS BBP94/BBP96S beamZ
The AC-440 Soft Case is specially designed to protect and extend the life of mobile uplights. It fits other products and accessories as well. Constructed of rugged black 600D polyester and nylon for maximum protection.
Quality protection for mobile uplights BBP94/BBP996S
6 compartments to individualy store the uplight
Additional compartment for storing Cables and other Accessories
Saves valuable transport space by allowing fixtures to be stacked without having to be boxed
Affordable padded soft case
Product colour
Black
Dimensions: Internal
130 x 130 x 130mm (fixtures), 65 x 275 x 130 mm (accessories)
Dimensions (L x W x H)
540 x 330 x 150mm
Weight (kg)
0.7000
228.6
New
AC-460 SOFT CASE 4 UPLIGHTS BBP96 beamZ
The AC-460 Soft Case is specially designed to protect and extend the life of mobile uplights. It fits other products and accessories as well. Constructed of rugged black 600D polyester and nylon for maximum protection.
Quality protection for mobile uplights BBP96
4 compartments to individualy store the uplight
Additional compartment for storing Cables and other Accessories
Saves valuable transport space by allowing fixtures to be stacked without having to be boxed
Affordable padded soft case
Product colour
Black
Dimensions: Internal
135 x 135 x 190mm (fixtures) 35 x 280 x 190 mm (accessories)
Dimensions (L x W x H)
380 x 325 x 210mm
Weight (kg)
0.6500
243.85
New
AC100 UPLIGHT RAIN COVER beamZ
Weatherproof cover for uplights.
Suitable for the following models: 150.589, 150.592 and 150.594
Transparent material specialy made for outdoor use
Rugged corner material provides durability
Easy to fold
Dimensions (L x W x H)
155 x 160 x 225mm
Weight (kg)
0.1000
15.25